Swimwear Fabric Sourcing Checklist: 6 Steps I Use to Avoid $10K+ Mistakes with REPREVE, Lyocell, and Viscose

2026-11-20 · Jane Smith

Who this checklist is for

I'm a fabric sourcing manager handling swimwear and performance apparel orders for 9 years. I've personally made (and documented) 7 significant fiber-specification mistakes, totaling roughly $18,400 in wasted budget. Now I maintain our team's pre-order checklist so nobody repeats the same errors.

This list is for anyone sourcing swimwear fabric who has to compare quotes involving REPREVE, lyocell fabric, viscose fabric, or any mix of the above. It won't help you pick a color. It will help you avoid ordering 3,000 meters of the wrong thing. Six steps. In order.

Step 1: Name the fiber family before you name the brand

This is the one I got wrong first.

REPREVE is a brand name for recycled polyester and recycled nylon fibers. Lyocell fabric is a regenerated cellulose fiber (TENCEL is the best-known branded version). What is viscose fabric? Also regenerated cellulose—just made through a different process. Three different material families. Three different performance profiles. And sales sheets may describe all three using the word "sustainable" or "eco-friendly."

Why does this matter for swimwear specifically? Because polyester (virgin or recycled) resists chlorine and holds stretch recovery. Lyocell is soft and breathable but loses wet strength. Viscose behaves similarly to lyocell in water, sometimes worse. If you spec lyocell into a chlorine pool suit, you have a failure waiting to happen—regardless of how the swatch felt in the showroom.

I assumed "premium sustainable fiber" meant "swimwear-ready." Didn't verify. Turned out lyocell fabric characteristics in chlorinated water were nothing like the sales rep implied. That's step one of my mistake log.

Step 2: Ask for the full spec sheet—not the marketing one-pager

You need numbers, not adjectives. For any candidate fiber, demand:

If your supplier can't produce these on request, that's not a red flag—it's a stop sign. I've walked away from two vendors over this. Both came back two weeks later with the numbers. One of them still had a wet-tenacity reading that disqualified them for swimwear.

Branded fibers usually have this data on file. Ask the brand's technical team directly if the mill stalls. It's their job.

Step 3: Verify the recycled content chain—especially for REPREVE swimwear fabric

Here's the part most buyers get lazy on. "Made with recycled content" sounds good. Proving it is something else.

Per FTC Green Guides (16 CFR Part 260), environmental claims like "recycled" must be substantiated. A product claimed as "recycled" should actually contain recycled material, and the qualifier should be clear about the percentage. This isn't optional—it's regulation.

So when a mill tells you the fabric is "repreve swimwear fabric," ask for:

  1. The brand's transaction certificate or chain-of-custody documentation (U-Trust, GRC, or equivalent)
  2. The declared recycled content percentage
  3. Date of the certificate (some expire)
  4. Which specific REPREVE fiber grade is used

In Q1 2023 I approved a recycled-content fabric on the strength of a PDF that turned out to be three seasons old. The fiber grade had been discontinued. We didn't catch it until the dye lot came back with different shrinkage. $2,150 wasted on 900 meters. Credibility in front of a swim client—damaged.

Step 4: Run your own chlorine and salt-water tests before bulk

The supplier's lab results are a starting point, not an answer. I don't have hard data on industry-wide failure rates for branded fibers used in swimwear—my sense is that most failures trace back to fiber-application mismatch rather than bad fiber, but I can only speak to what I've seen.

What I can say: on every swim program since 2021, we run our own accelerated chlorine test (JIS L 0884, 100+ hours equivalent) and a 5-cycle saltwater wash test on three swatches per colorway. If the fabric is a lyocell or viscose blend, we double the sample count. Regenerated cellulose fibers are not the natural swim candidate they're sometimes marketed as.

Cost of testing: about $180 per colorway through our third-party lab. Cost of a failed bulk order: somewhere between $3,000 and $12,000, depending on order size. You do the math.

Step 5: Calculate total cost of ownership, not piece price

The $4.80/meter quote from Mill A. The $5.60/meter all-inclusive quote from Mill B. On paper, Mill A wins by 17%.

Then you add: MOQ surcharge for non-stock colors (+$0.35/m), dye-lot minimum fee (+$220 flat), 4-week longer lead time that pushed a production slot (+$600 in air freight), and the rush test fee because their spec sheet was incomplete (+$180).

Mill A's effective cost per meter: $6.14. Mill B, all in: $5.60. Suddenly the "expensive" supplier was cheaper. That $500 quote became an $800 order.

I keep a simple TCO spreadsheet for every fabric quote now—piece price, MOQ, dye-lot fees, lead time cost, certification cost, and a risk buffer (10% for regenerated cellulose, 5% for polyester-based). I look at that number, not the piece price. Every time.

Step 6: Place a pilot order—even when the supplier pushes you to bulk

Pilot 50–100 meters, in production dye conditions, from the actual lot that would run your bulk order. Test it in-house. Wash it. Sew a sample. Swim in a sample.

The temptation is to skip this on well-known fibers. "It's REPREVE, it's TENCEL, it's a name brand." Yes, and I've had name-brand fiber arrive with a flaw at the yarn level that killed two colorways. The brand doesn't control every finishing step your mill runs.

Risk weighing on the pilot: the downside was about $650 in extra sample and freight cost. The risk of skipping it was a $9,800 redo on a 2,400-piece order. I kept asking myself: is $650 worth saving $9,800 of theoretical risk? Even a 10% chance of failure made it a clear yes.

Common mistakes I still see buyers make

Even with this checklist, I watch people trip on the same things. A few to flag before you close the PO:

One caveat: this checklist is written from a mid-size swimwear label's perspective—roughly 30–60k units per season, mostly domestic mills with some overseas. If you're sourcing at very high volume or through a full-package agent, some steps compress and some expand. Your mileage may vary.

The checklist itself: fiber family, spec sheet, recycled chain, in-house test, TCO number, pilot. In that order. It's not glamorous. But I wish I'd had it in 2017.

Leave a note